System Requirements
All hardware and software requirements necessary for installing manage.ID are listed here.
Hardware Requirements
The resources manage.ID needs depend mainly on two factors:
- the number of printers and other devices (scanners, I/O modules) connected to manage.ID
- the number of print jobs manage.ID processes
Choose the installation size that matches the number of devices you plan to connect.
The values below apply to a server that runs only manage.ID. If other software runs on the same server, it takes resources away from manage.ID. In this case, add the resources that the other software needs on top of the values below.
- CPU: 4 cores
- RAM: 16 GB
- Disk space: 100 GB SSD
- CPU: 8 cores
- RAM: 32 GB
- Disk space: 250 GB SSD
- CPU: 16 cores
- RAM: 64 GB
- Disk space: 500 GB NVMe SSD
Print volume: If you expect a high print volume (more than approx. 1,000 print jobs per hour) or want to keep printer logs for a long time, choose the next larger installation size.
Operating system: Windows Server 2022 or Windows Server 2025 (x64)
Disk Space
manage.ID stores all print jobs, printer logs and logistic units in its database. The database grows continuously during production. Also plan disk space for:
- Backups: Keep enough free space for several backups. Each backup is roughly as large as the database.
- Log files: With many devices and a high print volume, log files can grow by more than 1 GB per day.
We recommend storing backups on a separate disk from the database.
Network
A network connection of 1 Gbit/s is sufficient. A low latency between the manage.ID server and the printers is more important than a high bandwidth.
Software Requirements
You must have Local Administrator rights on the device where you install manage.ID.
The manage.ID installer installs all required runtime components, including Java (Amazon Corretto) and the database (PostgreSQL). You do not need to install them yourself.
Supported Browsers
Users access manage.ID through a web browser. The following browsers are supported:
- Google Chrome 117 or newer
- Microsoft Edge 117 or newer
- Mozilla Firefox 121 or newer (Firefox ESR 128 or newer)
Internet Explorer is not supported.
Required Open Ports
manage.ID consists of several software components. Most of them only communicate with each other on the manage.ID server. Only the following ports must be reachable from other devices in your network. Ensure these ports are open in your firewall before installing:
| Port | Component | Required |
|---|---|---|
80 / 443 | Web application and Web API (HTTP / HTTPS) | Always. All users access manage.ID through this port. External systems (ERP, MES) also call the manage.ID Web API through this port. |
2000, 6100–6105 | Scanner (incoming connections from scanners to the manage.ID server) | Only if scanners connect to manage.ID over the network |
In addition, manage.ID establishes outgoing connections to your devices. Ensure that your firewall allows these connections from the manage.ID server to the devices. The port is configured per device in manage.ID. The following table lists the default ports:
| Port | Device |
|---|---|
9100 | Printers with RAW socket communication (e.g. NOVEXX) |
9100, 9101 | Logopak printers (PL6). Port 9101 is used for signals. |
22 | Logopak printers (PL6), file transfer via SFTP (e.g. layouts and log files) |
8000, 8100, 8200 | Logopak printers (PL3) |
9084, 9184, 9284 | Logopak printers (PL3), used to reset the connection |
49153 | I/O modules (W&T Web-IO) |
4840 | OPC UA devices |
389 / 636 | LDAP / LDAPS, only if users log in with Active Directory accounts |
The following ports are used only on the manage.ID server itself. You do not need to open them in your firewall: 5432 (database), 5672 (AMQP), 8080 (Keycloak), 8081 (Core), 8087, 8088, 8089, 8095, 8098 (internal services).